How would you install an Air Conditioner in Your Home?

Air conditioning installation is one of the most important tasks after buying the right AC as there is more than just picking up parts and assembling them on the wall. Science plays a vital role in choosing the desired area.

install an Air Conditioner - How would you install an Air Conditioner in Your Home?

The manufacturer’s guide for air conditioning installation must be read carefully to get the most out of your AC unit. The location of the AC inside your room matters the most.

Steps to Install Air Conditioner in Home

  • Firstly, you must select the right location for mounting your split AC. You must avoid direct sunlight, heat sources, oil mist or comical element at any cost.
  • There is a requirement of at least 15cm of space surrounding the AC unit which should be mounted 7 feet high from the ground.
  • The entire group should be placed at least 1m away from power cables of different devices at home like TV, Radio, telephone, etc.
  • The wall on which you are planning to mount the air conditioner should be strong enough to support the weight and if required you must use the additional wooden or steel support.
  • Hold the mounting that came along with your split AC and places it at the appropriate position on the wall. Drill holes at suitable locations and fix the mounting securely and ensure that it is utterly horizontal.
  • Drill a hole of suitable diameter (around 7.5 cm) which must slope downwards at the exterior for better flow of the fluid. The inserting flange which is flexible will also give you an added advantage.
  • Check all the electrical connections and make proper connections as well as increased power supply. You may need an electrician’s help in installing the power socket that is specifically built for air conditioning installation.
  • Next, you must do the piping properly and do not forget to insulate the copper pipe. You may use PVC pipe to join the water drainage pipe with the indoor unit of the AC. You should also ensure that the drainage pipe is throwing out water to the appropriate place such that it does not become a nuisance.
  • Finally, you may secure the indoor unit of your AC correctly by pressing it into the wall mount.
  • Next, it’s time to install the condenser unit which is set in the exterior of the home to vent out the heat to the atmosphere.
  • You must ensure that it is mounted at a place which is away from dust, warmth and heavy traffic. Additionally, any radio antenna or TV cables must be at least 3 meters away from the condenser unit.
  • Now connect all the wires by following the circuit diagram provided by the manufacturer. Do not make any mistake in these connections as it may permanently damage the condenser.
  • Use a vacuum pump take out all the moisture and air from the refrigerant circuit. Make sure to check all the valves and seals for leaks.
  • Next, mount all the cables and piping at the appropriate places using clamps and other supports to ensure that the entire system remains intact.

But the above DIY technique will take much time and if you want to save your time and efforts then you can hire the professional air conditioner installation services. They are trained and certified by the manufacturing companies, and they can easily install your air conditioner within few hours.  Air conditioning installation is a significant task, and you might need the help of a technician for making the right connections. However, if you can understand the circuit diagram well, then you may go ahead on your own and use the above steps to install AC at your home.


pinit fg en rect red 28 - How would you install an Air Conditioner in Your Home?

You might also like;