Top 5 Steps for Repainting Kitchen Cabinets

If you want to renovate the kitchen cabinet with new ones think twice because you have invested a lot in the older ones. In fact, you can repaint and make them look as good as new. One should apply common sense and innovativeness to accomplish the task. People may like the DIY instructions because they are simple and easy for the common men to understand. Here are certain steps that can be followed to accomplish the task in an easy and hassle-free manner.

Kitchen Cabinets - Top 5 Steps for Repainting Kitchen Cabinets

#1. Remove the Cabinet and Drawers:

Removing the cabinets and drawers would go a long way in delivering sterling results to the users. It is the process of disassembling the whole structure. You should keep the screws and other components in a plastic bag so that they can be tracked down as and when required. One should also number the parts for easy identification during the assembly process. It is an important step in the repainting process so that the task can be accomplished in an easy and hassle-free manner.

#2. Cleaning the Cabinets:


One of the most vital tasks is to clean the cabinet right from the ground. Due to persistent usage, grease and grime get accumulated inside the furniture. Removal is essential to prevent the mixing of the dirt with the paint to sully the appearance of the cabinet. You should use the trisodium phosphate with water to eliminate the impurities right from the ground. It will help to clean the furniture and make it ready for the repainting process.

#3. Repairing the Holes and Dents:

Before transforming the cabinets, you should plug in all the holes and dents as they can interfere with the repainting the cabinets. You should diagnose the issues right from the ground and take adequate steps to smoothen the surface to a great extent. All the old hardware holes must be filled before the painting. It would go a long way in making the cabinet appear amazingly attractive.

#4. Sanding and Cleaning:

The next process is the sanding of the surface to remove the rogue particles in an impeccable manner. Once the areas are filled, sand is applied to dry them up as soon as possible. If the repainting of the cabinet is in fact a facelift, you do not have to use the sand to accomplish the task.

Wood sanding plays an important role in cleaning the round edges. They should not be cleaned with any other fabric because it may not provide desired output to the users. You should make sure that every aspect of the cabinet is dried to the core.

If the old painting is falling off automatically from the wood, it is vital to scratch and removes the previous layers. If not, they can hamper the painting process and create lots of problems in a renovation. Stain killing primer seal is also very handy for completing the job to a great extent. The areas to be sanded is cleaned and perfectly painted to deliver desired output to the users.

#5. Primer:

After completing the above-mentioned task, it is vital to apply the primer. You may have to use good quality 3-inch brush to complete the process. Primer seal is also helpful for imparting gloss to the cabinet and make sure that it lasts for a very long time.

Semi-Gloss latex paint is added to the eclectic mix as it stays forever on the wooden door. You should start by painting the inside edges and the opening of the face frames. Paint should always be applied in thin light coats to attract the attention of the people to a great extent. To complete the project, one should have enough time at hand.

These are above details about the repainting kitchen cabinets, how to do it and Visit this link if you want to get more details about the kitchen cabinets.

pinit fg en rect red 28 - Top 5 Steps for Repainting Kitchen Cabinets

You might also like;